[Return to Physics Homepage]     [Return to Mike Coombes' Homepage]     [Return to List of Handouts]     [Return to Problem Sets]     [Return to List of Solutions]

Questions: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15


Physics 1101

Waves


  1. A wire of length 4.35 m and mass 137 g is under a tension of 125 N. What is the speed of a wave in this wire? If the tension is doubled, what is the speed? If the mass is doubled?

    The speed of a wave on a string is given by the formula , where is the linear density given by . Thus the speed is

    .

    If we double the tension, v = 89.1 m/s .

    If we double the mass, v = 44.5 m/s .

    [Return to Top of Page]


  2. A wave on a string has the formula y = 0.030sin(0.55x - 62.8t). What is the wavelength, frequency, period, and speed of the wave. The string has a linear density μ = 0.020 kg/m. What is the tension in the string? What is the rate of energy flow of the wave?

    First recall that the formula for a wave on a string is given by Thus, by inspection, we have A = 0.030 m, , and . Solving for λ and T yields λ = 11.4 m and T = 0.100 s.

    We know that frequency is given by f = 1/T = 10.0 Hz.

    As well, the speed of the wave is given by v = λ/T = 114 m/s.

    To find the tension in the string, we take and rewrite it as . For the given values, Ftension = 260 N.

    The rate of energy flow, or energy per unit time, or power, is given by the formula , where ω = 2πf. For the given values, P = 4.05 Watts.

    [Return to Top of Page]


  3. On a point on a string, a peak of an harmonic wave is observed to pass every 0.050 s. The distance between peaks is 0.75 m. The height of the peak is 0.025 m. What is the equation of this wave? Assume that the wave is moving to the left. What is the speed of the wave? The string has a linear density μ = 0.020 kg/m. What is the tension in the string? What is the rate of energy flow of the wave?

    Since the peak of the harmonic wave is observed to pass every 0.050 s, T = 0.050 s. Since the distance between successive peaks is one wavelength, λ = 0.75 m. The amplitude of a wave is given by the height of the peak, so A = 0.025 m.

    Next recall that the formula for a wave on a string is given by For waves moving to the left, we need the + sign. So the required equation must be

    The speed of the wave is given by v = λ/T = 1.50 m/s.

    From the previous question, we saw that could be rearranged to give . For the given values, Ftension = 0.045 N.

    The rate of energy flow, or energy per unit time, or power, is given by the formula , where ω = 2πf. For the given values, P = 0.296 Watts.

    [Return to Top of Page]


  4. The waves on a certain string move at 50.0 m/s. The string is 7.5 m long. If both ends are fixed, what are the first five resonance or standing wave frequencies? If one end is free, what are the first five frequencies? Is there any way of telling that a string is fixed or free at one end by looking at a sequence of resonance frequencies?

    (i) The standing wave of resonance frequencies of a string fixed at both ends is given by the formula where n = 1,2,3,… Since we are given v and L, we have

    fn = n(50 m/s)/(2 × 7.5 m)= n(3.33 Hz).

    The first five frequencies are thus: f1 = 3.33 Hz, f2 = 6.67 Hz, f3 = 10.0 Hz, f4 = 13.33 Hz, and f5 = 16.67 Hz.

    (ii) The standing wave of resonance frequencies of a string fixed at only one end is given by the formula where n = 1,3,5,… Since we are given v and L, we have

    fn = n(50 m/s)/(4 × 7.5 m) = n(1.67 Hz).

    The first five frequencies are thus: f1 = 1.67 Hz, f3 = 5.00 Hz, f5 = 8.33 Hz, f7 = 11.67 Hz, and f9 = 15.00 Hz.

    (iii) If we have a sequence of resonance frequencies, we can tell if the string is fixed at both ends or open at one end by looking at the ratio of the frequencies. To find the ratio divide through by the greatest common divisor. For a string fixed at both ends, the ratio will have both even and odd numbers. A string fixed at only one end will have only odd numbers. For example, from part (i) above, the ratio is 1:2:3:4:5, where the common factor 3.33 Hz is factored out. In part (ii), the ratio is 1:3:5:7:9, where the common factor 1.67 Hz is factored out. Notice that the greatest common factor is the fundamental frequency.

    [Return to Top of Page]


  5. Sketch the superposition of the following wave pulses.

    The superposition is the sum of the heights of each at each instant (Asuperposition = A1 + A2)

    [Return to Top of Page]


  6. A wire of length 4.35 m and mass 137 g is under a tension of 125 N. A standing wave has formed which has seven nodes including the endpoints. What is the frequency of this wave? Which harmonic is it? What is the fundamental frequency? The maximum amplitude at the antinodes is 0.0075 m, write an equation for this standing wave.

    First we sketch the standing wave.


    The equations for a string fixed at both ends are and . Examining the sketch , we see that n = #node - 1 = 6, so that this is the sixth harmonic. We are given L, so we need the speed of the wave v to determine fn. The speed of the wave can be found from the formula , where μ is the linear density given by . Using the given data, the speed may be computed

    .

    Hence,

    The fundamental, or n = 1, frequency is f1 = 7.24 Hz.

    The equation of a standing wave is given by In this case, we have

    ,

    where has been used.

    [Return to Top of Page]


  7. A string fixed at one end only is vibrating in its ninth harmonic mode. Sketch the wave. The speed of a wave on the string is v = 25.8 m/s and the string has a length of 8.25 m. What is the frequency of the wave? What is the wavelength of the wave? What is the fundamental frequency?

    The resonance frequencies of a string fixed at only one end is given by the formula where n = 1,3,5,… The first sentence tells us that n = 9 - the number of quarter wavelengths seen. We use this to sketch the standing wave.

    Using the formula, since we have n, v and L,

    f9 = 9(25.8 m/s)/(4 × 8.25 m) = 7.04 Hz.

    The fundamental frequency occurs when n = 1, so

    f1 = 1(25.8 m/s)/(4 × 8.25 m) = 0.78 Hz.

    The wavelength of a string fixed at both ends is given by the formula , where n = 1,3,5,… Thus we have

    λ9 = 4(8.25 m)/9 = 3.67 m.

    Of course, we could just look at the sketch and see that one full wavelength is 4 quarters of the nine quarters displayed, so that the wavelength was just 4/9 times the length of the string.

    [Return to Top of Page]


  8. Three successive resonance frequencies for a certain string are 175, 245, and 315 Hz. (a) Find the ratio of these three modes. (b) How can you tell that this sting has an antinode at one end? (c) What is the fundamental frequency? (d) Which harmonics are these resonance frequencies? Sketch the standing wave patterns. (e) If the speed of transverse waves on this string is 125 m/s, find the length of the string?

    (a) The ratio of these three frequencies is 175:245:315, or 535:735:935, or 5:7:9.

    (b) For a string fixed at both ends, the resonant frequencies are given by , where n =  1, 2, 3, 4, … For a string fixed at only one end, the resonant frequencies are given by , where n = 1, 3, 5, 7, 9, … Since the given sequence has only odd numbers, we may conclude that the string is fixed at only one end.

    (c) The fundamental frequency is the greatest common factor of the sequence, so f1 = 35.0 Hz.

    (d) The harmonics are the 5th, 7th, and 9th.

    .

    .

    .

    (e) Since , we can rearrange this equation to find the length,

    .

    [Return to Top of Page]


  9. While watching an archery show you recorded earlier, you notice that when the 1.05 m arrows hit a target they vibrate with the following pattern. Using frame advance on your PVR you deduce that the arrow vibrates 110 times per second. What is the speed of the waves travelling through the arrow?

    We see that this pattern is the same as the third harmonic of a string fixed at one end and free at the other. In the third harmonic, we see only 3/4th of the length of the full wave, so λ = 4/3 × L = 4/3 × 1.05 m = 1.40 m.

    The frequency of vibration is given as f = 110 Hz.

    The speed v in the arrow (not the speed of the arrow!) is related to wavelegth and frequency by v = λf = (1.40 m)(110 Hz) = 154 m/s.

    [Return to Top of Page]


[Return to Physics Homepage]     [Return to Mike Coombes' Homepage]     [Return to List of Handouts]     [Return to Problem Sets]     [Return to List of Solutions]

Questions? mike.coombes@kwantlen.ca

[Return to Kwantlen Homepage]